Aitelong SAT-17T 6 motor Optical Fusion Splicer

  • Category: Fusion splicer




Main features:

1). Ultra-low Splice loss

2). Mirror Less Design

3). Low weight , less than 2Kg with battery and bumper

4). Full automatic heater

5). 7 sec fast splicing

6). 7800mAH large Li battery pack

7). Compatable with bare fiber,tail fiber and indoor cable

8). Wind protect, dust-proof, water-proof


Fiber Type
Single Fiber
Applicable Fibers
SM (single mode), MM (multi-mode), DS (dispersion), NZDS (non-zero dispersion),
Average Loss
0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS), 0.02dB (BIF/UBIF)
Return Loss
9s / 7s (fast mode)
Typical splicing time
250μm, 600μm, 900μm,2~3mm and 3.5mm
Compatiable cable
250μm, 600μm, 900μm,2~3mm and 3.5mm
Fiber aligning
Core alignment and cladding alignment
Fiber Diameter
Cladding diameter:80~150μm
Coating diameter:100~1000μm
X or Y, magnify 360X
X + Y, magnify 180X
Image display
High-performance 4.3 inch LCD
Tensile test
Standard 2N
Splicing mode
100 (10 factoty pre-defined)
Heatig mode
100 (4 factory pre-defined)
Heat-shrinkable tubing
60mm, 45mm, 20mm or other types
Battery capacity
7800mAH, 86.58WH
300 times (splicing and heating)
Charging time: about 3h (can be used while charging)
Battery life
1000 charging cycles
Electroce life
Typical 3,000 times, and replaceable
External interface
Mini USB
Result record
Maxmium10000 results
Heater Function
Automatic, support user defined heating mode, 0ºC ~ 300ºC adjustable
Power supply
Built-in lithium battery: 11.1V; AC/DC adapter input: AC 100-240V
Output: DC 13.5V / 5.0A
Working Environment
Temperature: -20ºC ~ +55ºC (-4ºF~131ºF); Humidity: 95% RH (40°C non-condensing)
Altitude: 0~5000m
L×W×H=166×146×159 (mm)
1.6kg (without battery), 2.0kg (with battery)